SENNEBOGEN 870M SERIES MATERIAL HANDLER
•
Features a 426-hp engine and a working radius of 68 feet 11 inches•
Operating weight of 165,400 pounds•
Machine does not require computers to control the hydraulic system•
Ultra-fine hydraulic oil filtration system reduces maintenance costs and machine downtime•
Central lubrication system standard•
State-of-the-art load-sensing hydraulic system•
Low noiseVisit www.sennebogen-na.com, e-mail sales@
sennebogen-na.com or call 704-347-4910 for more information.
MOD SHIP SHAPE P-291 BULK CONTAINER
•
Enables consolidation of small loads for more efficient transport•
Fitted with four industrial-strength casters for easy movement without a lift truck•
Nests when empty and may be manually rolled onto trailers for additional efficiencies in return transport for reuse•
Accommodates payloads of up to 700 pounds in 32 cubic feet of space on a standard 44-by-44 footprint•
Rotationally molded from one piece of polyethyleneVisit www.reycleosaurus.com, e-mail mlavelle@
modroto.com or call 800-829-4535 for additional information.
MCCLOSKEY INTERNATIONAL S190 SCREENER
•
Screening system with vibratory flatdeck•
Features a 5-foot-by-20-foot "high energy" screening box engineered to allow steep screening angles•
Offers a screening area of 190 square feet for increased throughput•
Includes five screen box settings that range from 20 degrees to 30 degrees•
Adjustable vibration stroke from 6 mm to 10 mm•
Shaft speed adjusts from 950 to 1,130 rpm•
"Travel-out" guarded walkways need no folding or disassembly for transport•
Available in track-mounted and tri-axle wheeled models•
Powered by a 125-hp Caterpillar engineVisit www.mccloskeyinternational.com or call 877-TROMMEL for more information.
KINSHOFER MQP SERIES
•
Multi Quick Processors feature 20 percent more power and faster cycle times—two seconds on closing and 2.7 seconds for opening—than earlier models•
Designed for cutting steel and crushing concrete with three quick change jaw options (combi, pulverizer and steel)•
Hydraulic system enables jaw set changes in about 10 minutes•
For use with excavators ranging from 20 to 65 metric tons•
Key features include a guide plate at the pivot for more precise alignment and greater jaw stability, exchangeable wear parts, a rotation head with two additional oil passages, rotation circuit filters and bearing points engineered for optimum load handling and reduced wearVisit www.kinshofer.com or call 905-335-2856 for more information.
PRECISION AIRCONVEY WASTEPAC DENSIFIER
•
Automatically converts plastic film, foil, poly-coated paper and other scrap material into rigid bricks measuring from 4 inches to more than 8 feet long•
Uses a compaction ration of 40:1•
Features a built-in temperature sensor that prevents startup until the optimum temperature has been reached•
Designed to be easy to use b one person with minimal training•
Installs in five minutesVisit www.airconvey.com/products/briq.shtml, e-mail get-facts@air
convey.com or call 302-266-7559 for more information.
MUSTANG 842 TELEHANDLER
•
This four-story telehandler offers a 42-foot lift height•
Shares the boom design of Mustang’s Deluxe Series of telehandlers, models 944 and 1155•
Features pilot-operated joystick controls, a tilt cylinder and an optional work platform system•
Includes a rear-axle stabilizer cylinder that gives operators a stable four-point stance when the boom is raised above 60 degrees, a ROPS/FOPS canopy with increased room for the operator and axles with internal wet disc breaks that dissipate heat more efficiently to help increase the service life of the breaksVisit www.mustangmfg.com for more information.
HITACHI ZAXIS 350LC-3 EXCAVATOR
•
Replaces the Hitachi Zaxis 330LC and Zaxis 370 excavators•
Powered by Isuzu’s new six-cylinder, Tier-3 engine•
Weighs in at 77,269 pounds and comes standard with a 13-foot, 1-inch arm and 16,314-pound counterweight and 32-inch triple semi-grouser shoes•
Engine offers improved fuel efficiency and greater output through a common-rail fuel injection system and the cooled Exhaust Gas Recirculation system•
Features the new and improved HIOS III hydraulic system, formulated to match the engine’s torque curveVisit www.hitachiconstruction.com or visit a local Hitachi dealer for more information.
DENSE-OUT VIBRATORY SEPARATOR
•
A specialized vibratory air system designed to classify mixed materials based on differences in density•
Available in many standard sizes•
Removes "heavies," such as rocks, bricks, metal, glass, etc., from less dense material•
Uses dry separationCall 503-537-1111 or visit www.actionconveyors.com for more information.
Explore the March 2007 Issue
Check out more from this issue and find your next story to read.
Latest from Recycling Today
- Summa Equity acquires majority stake of Bollegraaf
- PTR adds new inside sales account manager
- Cascade Engineering distributes free carts in Flint, Michigan
- CMRA selects venue for nonferrous recycling event
- Biffa adds C&D recycling firm to its portfolio
- Cliffs lines up funding for Canadian acquisition
- BIR joins plastics life cycle effort
- Black mass analysis in the sights of equipment maker