INTERNATIONAL BALER TR-830
• Entry-level two-ram baler provides many of the same features found on IBC’s larger two-ram balers
• Delivers more automation than traditional horizontal balers
• Wire tie system, bale release door and full bale ejection standard
• Conveyor and cart dumper available
• Features heavy-duty welded construction and a "removable" chamber wall
• Fully automatic baling with multi-material capabilities
Visit www.intl-baler.com, e-mail sales@intl-baler.com or call 800-231-9286 for more information.
LIEBHERR "GENERATION 6" WHEEL LOADERS
• Available in models L 566 and L 580, which replace the L 564 and the L 580 models
• Include travel drive with Liebherr’s 2plus2 technology
• Equipped with Tier 3-compliant engines.
• Cab is 28 percent larger than on earlier models
• Additional safety features include single part laminated windscreen, large external mirrors, four front floodlights, collsion protection in the rear ballast and large steps for safe entrance in to the cab
Visit www.liebherr.com, e-mail info.lce@liebherr.com or call 757-928-8746 for more information.
BTI SH SERIES HYDRAULIC SHEARS
• High production, low-maintenance
• Feature a large bore hydraulic cylinder and an exclusive speed/regeneration valve
• Guide slide puck system reduces jaw stress and helps to reduce jamming
• Added front blade is said to increase cutting capacity and to eliminate lower jaw wear
• Cutting blades, blade guide can be reversed and rotating, lengthening wear part life
Visit www.rockbreaker.com, e-mail twitt@rockbreaker.com or call 951-369-0878 for more information.
ECONOMIZER ESS SERIES SHREDDER
• Available in four models—ESS 850, 1200, 1500 and 2000—with feed openings ranging from 47.3 inches by 35.4 inches to 55.9 inches by 82.7 inches and drive capacities ranging from 50 hp to 150 hp
• Designed for reducing large parts, purgings
• Includes a self-aligning gearbox that is capable of transmitting the heavy shock loads encountered when shredding heavy material
• "Swoop" style ram uses gravity and pressure, allowing a better approach angle to the rotor
Visit www.theeeconomizer.com or call 508-399-3111 for more information.
MORBARK 4600XL WOOD HOG
• Hammermill grinder is 14 percent larger
than its predecessor with a tip swing of 36 inches
• Features a 60-inch in-feed and power op-tions up to 860-hp
• Includes an internal planetary drive feed wheel with no chains and sprockets for improved torque and durability
• Equipped with 18 hammers and an Iqan System that provides a consistent feed
• Satellite modem for troubleshooting optional
Visit www.morbark.com or call 800-831-0042 for more information.
LINK-BELT 700 LX
• Tracked hydraulic excavator weighs in at 152,600 pounds; mass excavator version weighs in at 153,700 pounds
• Features a Tier 3-compliant, 425-hp, six-cylinder Isuzu engine
• Equipped with the Inte-LX computer system that monitors hydraulic output and pressures and regulates engine performance
• Operators can select the machine’s working mode to match its output to the job or employ the Auto-Mode feature, in which Inte-LX changes the work mode based on actual pressure readings
• Auto Power Swing design incorporates a selector valve to help maintain attachment and swing flows
• Features a large, low-noise cab and long undercarriage for stability
For more information, visit www.lbxco.com or e-mail sales@lbxco.com.
Explore the June 2006 Issue
Check out more from this issue and find your next story to read.
Latest from Recycling Today
- Summa Equity acquires majority stake of Bollegraaf
- PTR adds new inside sales account manager
- Cascade Engineering distributes free carts in Flint, Michigan
- CMRA selects venue for nonferrous recycling event
- Biffa adds C&D recycling firm to its portfolio
- Cliffs lines up funding for Canadian acquisition
- BIR joins plastics life cycle effort
- Black mass analysis in the sights of equipment maker