Products

• A small, light, tube-based hand-held analyzer

• Features a rear-facing display for easy legibility

• Removable handle allows it to fit into tight places with ease

• Use "Smart Beam" x-ray tube technology and a high-resolution Si PiN diode detector eliminating radioactive isotopes, government regulations and costly disposal or travel restrictions

• The HP iPAQ pocket PC runs with up to 25-element software suites using fundamental parameters, spectral matching or empirically generated calibrations and includes a color touch screen and up to 1 GB of memory, Bluetooth and e-mail and Internet access

• Uses the Allied-Gator Power Link and Guide System to increase its force as the jaws close, delivering more force and better jaw alignment when shearing or crushing

• Modular design allows full 360-degree rotation

• Knife and anvil cycle at the same rate on the centerline of the tool for more operator control, efficiency, speed and safety

• Available in 11 sizes from the MT5 to the MT180 for carriers weighing 5,000 pounds and up

• Shear tip features "disposable" wear components

• New Speed Circuit technology enhances production by delivering faster cycle times

• Available in three sizes—the mid-sized 190VP, the smaller 140VP and the larger 2VP

• A combination of multiple steel top-plate fastener segments under a single-piece, vulcanized-rubber top

• Rubber top extends life and reduces noise

• Skived (countersunk) installation is recommended to shield top plates from abrasive loads

• For the most abrasive applications, 140 and 190 sizes designated VPMA also offer bottom plates of MegAlloy, a heat-treated steel alloy offering two to three times the wear resistance of standard steel

• HiTorc electromagnetic direct drive system that eliminates gear reducers, belt drives, fluid couplings, motor bushings and virtually all interior wear parts

• Durable construction, low maintenance

• Provides maximum torque and power regardless of speed

• Offers full speed control and the widest speed range available

• Allows networking of entire processing lines, pre and post size reduction, to achieve synchronization of infeed and outfeed workflow

• Said to more than double the efficiency rating of traditional motors

• Offers "noiseless" operation

• Available as a permanent crossbelt overhead separator

• Features Tri-Polar magnetic circuitry that reduces magnetizing of steel equipment near the magnet

• Its concentrated magnetic field increases power compared to conventional permanent magnets of equal size

• Designed for easy belt removal and refitting

• Electric and hydraulic drive systems available

• Designed to be mount-ed on a skid-steer loader

• Works off the loader’s hydraulics to remove rims from scrap tires

• Promises ease of operation and a cycle time of seven seconds

• Features simple hand controls

• Custom blades, knives and systems for high-wear cutting processes

• Designed to optimize cutting, shredding or scraping processes, enhancing productivity and reducing energy requirements

• Manufactured from materials that match the application and treated to enhance wear

• Mid-sized loader with VersaLink linkage capable of performing a variety of applications

• Can be fitted with a variety of pin-on tools

• Features a single-piece, boom-style lift arm

• High-lift version available

• UHF-integrated, two-way radio headsets

• Also available in the Power-ComPLUS model

• Feature a programmable frequency range between 462 to 467 mHZ, 30 channel capability, 38 CTCSS privacy tones to avoid unwanted frequency chatter and 12.5/25 kHZ channel spacing

• Includes a rechargeable battery pack, voice-activated or push-to-talk transmitting and a noise-canceling boom microphone

• For use in high-noise communication applications where users want a simple integrated headset and two-way radio solution without the need for belt radios

• Available in three configurations: standard headband, neckband for use with or without hardhats and hardhat clip-in for use with slotted hardhats

• Features a caster configuration that creates a slight yet constant tipping action from the front or back, permitting smooth rolling over curbs, ramps, tailgates, speed bumps and other impediments

• Includes two over-size casters with 5-inch wheels in 4-inch, one-piece forks supported at the corners by four heavy-duty, swiveling 4-inch casters

• Accommodates payloads up to 400 pounds

• Nests for efficient storage and returns

• Measures 28.5 inches in width, meaning standard trailers can fit three across

• Rotationally molded of weatherproof polyethylene in a single unit for strength

• Offered with a range of options, including locks, forklift pockets and paper feed dividers for grade separation

• Vertical-feed grinder for processing C&D debris

• Features a 54-inch by 72-inch, fully machined rotor

• Suitable for use with diesel or electric drives from 600 to 1,200 hp

• Includes heavy-duty in-feed chute with ballistics protection, full interior wear liners and 12-inch diameter shaft

• Heavy-duty spherical roller bearings are mounted in cast steel pillow block housing for improved shock loading

• Hydraulic pivoting grinder housing for fast and easy maintenance access

• Heavy-duty hammer features reversible/replaceable hammer tips

• Model S205 offers greater performance through its vertical-path lift arm

• Offers good visibility and a rated operating capacity of 2,050 pounds

• Cab designed for optimum comfort and functionality

• Hydraulic pump capacity of 16.3 gpm

• Powered by a 61-hp Kubota V2403 diesel engine

• Lift height of 118.2 inches

• Optional deluxe instrument package available

• Designed for use with rough terrain forklifts for scrap, trash, pipe, log and round bale handling applications

• Available in 1.0 and 1.75 cubic yard capacities

• Dual grapples are individually operated

• Trash grapple buckets available in 1.75 and 2.25 cubic yard capacities

• All models are 96-inches wide and have a lift capacity of 10,000 pounds

• Feature an operating weight of 36,000 pounds

• Can absorb up to 25 times their weight in liquids

• Include a built-in degreaser that absorbs liquids while releasing a fresh citrus scent

• Effectively remove dirt, grease, asphalt, oils, lubricants, water-based paints, industrial carbons and other heavy-duty soil

• Ideal for cleaning hard, non-porous surfaces

• Can be rinsed and reused

• Resistant to solvents

• Passive media filtration system that’s highly recognized as a stormwater treatment best management practice

• Removes metals, solids, oil and grease from storm-
water runoff via filtration through media-filled cartridges

• Reduces environmental risks and fines by controlling pollutants

• Customized designs are available in multiple configurations including concrete, steel or recycled plastic