Bunting Magnetics Co. Hi Temp FF drawer magnet
_fmt.png)
Newton, Kansas-based Bunting Magnetics Co. has introduced a high-temperature version of its FF Series drawer magnet for the plastics industry that can perform at a drawer temperature of 350 degrees Fahrenheit. The Hi Temp FF drawer magnet:
- can be used in any plastic molding or extrusion application
- is most often installed above the opening of the molding machine and plastic resin passes through the drawer to remove ferrous contaminants
- drawers and accessories can be purchased independently to complement the existing housing
Visit www.buntingmagnetics.com for more information.
Sierra REB4 two-ram baler

Sierra International Machinery LLC, Bakersfield, California, has introduced its REB4 two-ram baler. The company’s REB4:
- features Sierra’s
patent pending dual-compression doors - uses 55 tons of force per door to push the material below the cutting knife and into the charging chamber,
predensifying the material before the cycle begins - is designed for greater input density in the charging chamber
Visit http://info.sierraintl.com/reb4-two-ram-baler-1 for more information.
CP Group Auger Screen
_fmt.png)
CP Group, San Diego, has introduced the CP Auger Screen, which it describes as “the industry’s first true anti-wrapping, nonblinding screen for material recovery facilities (MRFs).” The CP Auger Screen:
- sizes material by using a series of cantilevered augers that do not wrap or jam because of their corkscrewing motion
- releases any material that could wrap, such as hoses or plastic film, from the end of the auger
- dramatically decreases volume at the
presort when positioned before it - can be used in various applications, including municipal solid waste (MSW), single-stream, construction and demolition (C&D) and commercial and industrial (C&I) recycling
Visit www.cpgrp.com for more information.
Doosan DX225MH-5 material handler

Suwanee, Georgia-based Doosan Infracore North America LLC has introduced the DX225MH-5 material handler, which is geared toward a number of material handling applications in scrap yards, recycling facilities and solid waste centers and transfer stations. The DX225MH-5 material handler’s features include:
- a Tier 4-compliant engine
- a floor pedal that adds an optional way for operators to activate two-way auxiliary hydraulics
- a rear camera
- a list of available options, including a V-shaped side guard to add extra protection to the doors and exterior of the machine and a generator set that provides power for use with a magnet attachment
Visit www.doosanequipment.com for more information.
To have your product featured, please send a press release and photo to Megan Workman at mworkman@gie.net.
Get curated news on YOUR industry.
Enter your email to receive our newsletters.

Explore the June 2018 Issue
Check out more from this issue and find your next story to read.
Latest from Recycling Today
- Freepoint Eco-Systems receives $50M loan for plastics recycling facility
- PET thermoform recycling the focus of new NAPCOR white paper
- Steel Dynamics cites favorable conditions in Q1
- Hydro starts up construction in Spain
- Green Cubes unveils forklift battery line
- Rebar association points to trade turmoil
- LumiCup offers single-use plastic alternative
- European project yields recycled-content ABS