Beyond Heavy Lifting

The loaders employed at recycling facilities and at construction and demolition recycling sites perform a variety of material handling tasks, but their usefulness goes far beyond loading processing equipment and outbound trucks.

It’s this versatility that many manufacturers are keeping in the forefront as they design the next generation of material handling equipment, whether they be wheel loaders or skid-steer loaders.

Faced with these choices, selecting the right mix of equipment for a particular recycling yard or demolition job can be somewhat intimidating. However, determining the right loader typically starts with the material to be handled and the level of production required.

IN THE SHOWROOM. "A few key considerations that affect equipment selection would be the size of the job, the type of material being removed and the height of the structures," Rusty Schaefer, marketing manager for Case Construction Equipment, Racine, Wisc., says. "Additional considerations include dust control, sound restrictions and lift capacities of the equipment."

Schaefer adds that demolition contractors should also consider their project deadlines in order to determine the number of pieces of equipment needed and the way in which the machines will be used.

Kelly Moore, product manager for Gehl, West Bend, Wisc., says that while compact equipment may be more suitable for jobs with space restrictions, he suggests that choosing the largest loader a site will allow enables the contractor to increase his productivity by getting more done in less time.

"Large equipment allows for more production on open projects," Lance Mathern, marketing manager for Bobcat Co., West Fargo, N.D., agrees. However, he adds that compact equipment, like skid-steer loaders, is often less expensive, easier and quicker to transport on and off site, can fit into tight spaces and can operate a variety of attachments.

Neil LeBlanc, senior marketing consultant for Caterpillar Inc., Peoria, Ill., says that in the highly competitive demolition field, a contractor is most concerned with machine versatility, durability and dependability.

"All machines working at a site are often needed to perform multiple tasks. Various work tools, properly applied, are the key to success," he says.

As far as durability and reliability are concerned, Leblanc says, "Machines and work tool designs must afford for maximum up time when utilized in harsh environments."

With this information in mind, selecting among the variety of wheel loaders and skid steers available should be a bit easier, though both machines offer different strengths that may be more suitable for a given job.

FREE WHEELING. "In demolition, the wheel loader most often supports the primary demolition tool, the excavator," Jack Bolton of Volvo Construction Equipment, Asheville, N.C., says. "The loader can set barricades and set steel plates with a set of forks or a material handling arm. When equipped with a broom, the loader can clean dust and debris blown out from the demolition site. Of course, when the loader has a bucket, it can load trucks and clean large debris from haul roads," he adds.

Leblanc says wheel loaders are often used to move bulk quantities of demolition debris, such as crushed concrete, blocks and wood, in primary and secondary demolition applications. "Staging materials and loading trucks are a common requirement," he says.

"In terms of demolition, a wheel loader is primarily a tool carrier because of its ability to change attachments," David Morice, heavy-range equipment manager for JCB Inc., Pooler, Ga., says.

When equipped with hydraulic couplers, which allow for quick attachment changes, Case’s Shaefer points out that wheel loaders can be equipped with forks, scrap grapple buckets and brooms, increasing their versatility and utilization.

SKIDDING ALONG. "Overall, skid loaders are probably more predominant in recycling or demolition because of their versatility," Gehl’s Moore says. "For overall purposes, whether it is any kind of recycling or demolition application, the skid loader is really going to be the best performer and producer that a contractor can look for," he says, crediting the machine’s versatility.