To have your product featured in Recycling Today, please send a product release and a high-resolution image in tiff or jpeg format to Katie Morris at kmorris@gie.net.

Builtrite Magnet Rotator Attachment. North Shore Manufacturing, Two Harbors, Minn., has introduced the Builtrite MR 360-degree Magnet Rotator attachment. Features include:

Designed to handle longer objects, such as pipes, beams, railroad rails, bales and car bodies

360-degree continuous rotation on 20-inch internal tooth-slewing ring bearing and dual hydraulic motors

Fabricated head and base assembly with pin lock

Magnet to rotator mounting using three sliding T-bars

Heavy-duty, two-pass electric swivel manifold for extreme duty cycles

Visit www.builtritehandlers.com for more information.

Genesis Demolition Recycler. Genesis Attachments, Superior, Wis., has introduced what is describes as a more economical tool for processing concrete, the Genesis Demolition Recycler (GDR). Features include:

Designed for third-member use on machines in the 45,000-pound and larger class

Delivers 115 tons of crushing force at the tip, a 32-inch jaw depth, a jaw opening of 35 inches and a 5.5-second (at 66 gallons per minute) cycle time

The largest jaw Genesis has offered on a tool that mounts on a 20-ton class machine

Visit www.genesisattachments.com for more information.

Thermo Fisher Scientific XL3t Series Analyzers. Thermo Fisher Scientific Inc., Billerica, Mass., has introduced the Thermo Scientific Niton XL3t Series of analyzers with geometrically optimized large area drift detector (GOLDD) technology. Features include:

Designed to improve light element detection, overall sensitivity and measurement times

Combines the Niton XL3t’s 50-kilowatt, 2-watt X-ray tube, closely optimized geometry and patented signal processing hardware and software

Uses third-generation lithium-ion batteries

Visit www.thermo.com/niton for more information.

Bayne Cart Lifts. Bayne Premium Lift Systems, a Greenville, S.C.-based manufacturer of refuse cart lifters, has introduced its C/I Taskmaster series of cart lifters. Features include:

Designed for a variety of material handling applications, including waste disposal

Compatible with standard two-bar carts and tilt trucks equipped with lifting bars

Can be equipped with casters for mobile use, mounted to loading docks or mounted directly onto balers or compactors

Lifting capacities of 550, 750 and 1,000 pounds

Visit www.baynethinline.com for more information.

Reznor Waste Oil Heaters. Thomas & Betts’ HVAC Division (Reznor), Memphis, Tenn., has added models RA-250 and RAD-250 to the company’s line of waste oil heaters products designed for recycling used oils into free shop heat. Features include:

Model RA is a standard unit space heater, and Model RAD is a ductable furnace

Both models are rated for 250,000 Btu input

Models can be ceiling suspended or supported above the Reznor workbench fuel tank

Visit www.reznorheaters.com for more information.

Air-Weigh Refuse Vehicle Scales. Air-Weigh, Eugene, Ore., has announced the availability of scales designed for refuse vehicles built with air or walking-beam suspensions. Features include:

Can be installed on any refuse truck with an air-drive suspension, Hendrickson Haulmaxx or Hendrickson HN462 drive suspension

New scales incorporate Air-Weigh’s deflection sensor technology, which is designed to allow the accurate weight measurement on steer and driver axles with mechanical suspensions

Visit www.air-weigh.com for more information.

ECCO RotoLED Beacon and Minibar. The new 7660 Series RotoLED beacon and 5280 Series RotoLED Minibar from ECCO, Boise, Idaho, combines the benefits of the latest LEDs with the warning signal of a rotator. Features include:

LED hybrid technology provides a high-intensity rotating warning signal with no gears, brushes or bulbs to wear out

Uses a brushless magnetic drive system to spin the reflector disk, reducing noise and eliminating the typical motor/gear drawbacks associated with conventional rotators

Visit www.eccolink.com for more information.

Meese Orbitron P-433 Ship Shape Bulk Container. Meese Orbitron Dunne Co., Ashtabula, Ohio, has introduced its new P-433 Ship Shape bulk container. Features include:

Designed for handling dry products, such as scrap and recyclables, bulk chemicals and pharmaceuticals and other loose, granular and powdered products

Permits four-way lift-truck access in a palletless, reusable container

Enables lift-truck drivers to locate fork access points quickly without using their forks to rotate the containers or requiring workers to position the containers manually

Visit www.ShipShapeContainers.com for more information.

Read Next

The Talent Pool

January 2009
Explore the January 2009 Issue

Check out more from this issue and find your next story to read.